Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterEntry Doors in Gladeview, FL
Our Door Installation services in Gladeview typically run between $800 and $3,500 installed, depending on the door material, impact rating, and frame condition. Most jobs we complete in a single day, and we carry Therma-Tru doors in several configurations ready for South Florida’s humidity, salt air, and hurricane season. If your front door is warped, drafty, or simply not up to current Miami-Dade or Broward wind-load standards, this page covers what to expect when you call us.
Ed Winslow started this company in 2011, and entry doors have been part of the work from day one. Gladeview sits just west of Miami proper, which means the doors we install here face the same relentless combination of tropical heat, afternoon thunderstorms, and salty coastal air that eats through lesser materials in three to five years. We know this neighborhood’s conditions, and we spec doors accordingly. Call us at (727) 604-9322 – a live person picks up around the clock – or read on to understand exactly what goes into a proper entry door installation here.
This page is part of our broader Door Installation in Gladeview service, which covers everything from sliding glass doors to impact-rated garage doors. For a look at our full exterior-protection work, visit our home page.
When You Need Entry Doors
A failing or outdated entry door sends clear signals. Here’s what we see most often in Gladeview homes:
- Visible daylight around the frame. If you can stand inside with the lights off and see light bleeding around the door edges, the weatherstripping and possibly the frame itself have failed. In Gladeview’s summer months, that gap is also an air-conditioning bill you’re paying every hour.
- Door sticks or won’t latch cleanly. Wood doors absorb moisture and swell. Gladeview’s humidity routinely sits above 80 percent from May through October, and a door that stuck last August will be worse this year. Sometimes we can plane and re-hang; often the smarter fix is a fiberglass or steel replacement that won’t move with the seasons.
- Door doesn’t meet current impact standards. Homes built before 2002 in this area frequently have non-impact entry doors. If your home isn’t permitted with a Miami-Dade NOA (Notice of Acceptance) for the door unit, you may be looking at a higher insurance premium and real vulnerability during a named storm.
- Cosmetic damage that affects security. Dents in a steel skin, delaminating fiberglass, or a rotted wood bottom rail aren’t just eyesores – they compromise the door’s structural integrity. We’ve replaced doors in the West Little River corridor where the bottom third was soft enough to push through with a thumb.
- Lock hardware is outdated or damaged. Older mortise locks and single-cylinder deadbolts without anti-pick pins are common in Gladeview’s post-1970s housing stock. A new impact door comes with modern multi-point locking hardware as standard.
- You’re prepping for sale or refinance. Appraisers and inspectors flag non-compliant or visibly damaged entry doors. A Therma-Tru fiberglass unit with current Miami-Dade approval photographs well and checks the code-compliance box at the same time.
Our Entry Doors Process
We don’t hand you a brochure and disappear. Here’s what a typical entry door installation looks like when you work with Winslow Windows & Doors in Gladeview:
- Free in-home estimate. We come to your home, measure the rough opening, check the existing frame for rot or water intrusion, and assess whether your current buck and sill can accept a new unit or need to be rebuilt. You get a written, line-item price before we leave. No trip charge inside the home county.
- Product selection and permit coordination. Based on your opening, budget, and whether the home needs impact-rated product, we narrow down the right door from our Therma-Tru line. If a permit is required – and in Gladeview, most exterior door replacements do require one through Miami-Dade County’s building department – we handle the application. You’re not chasing paperwork.
- Order and scheduling confirmation. In-stock Therma-Tru units we can often source within a few days. Custom sizes or specialty finishes run two to three weeks. We give you the specific install window in writing, not a vague “sometime next month.”
- Installation day. A background-checked, uniformed crew arrives at the agreed time. Removal of the old door and frame debris is included. We set the new frame, level and plumb it, apply low-expansion foam and flashing tape to seal the rough opening, hang and adjust the door, and install the lock hardware. On a standard 36-inch single door with no frame rebuild, we’re typically done within three to four hours.
- Inspection and walkthrough. Before we pack tools, we open and close the door a dozen times, confirm the deadbolt throws cleanly, check the threshold seal against the sill, and show you how to adjust the hinge-side strike if the door ever settles. If a county inspection is required, we schedule and attend it.
- Done Right Promise. Every job is backed by our promise: if something isn’t right, we come back and fix it. That’s not a 90-day warranty from a call center. That’s Ed’s word, with a published address and license number behind it.
Entry Doors Pricing in Gladeview
Entry door installation in Gladeview, FL typically falls between $800 and $3,500 for the complete job – door, hardware, installation, and haul-away of the old unit. Here’s how the numbers break down by common configurations for Replacement Doors we install in this market:
| Door Type | Installed Price Range | Notes |
|---|---|---|
| Steel entry door, non-impact, standard size | $800 – $1,200 | Interior use or low-risk wind zones; not suitable for homes requiring Miami-Dade NOA compliance |
| Therma-Tru fiberglass, impact-rated, single | $1,400 – $2,200 | Most common replacement we do in Gladeview; meets Miami-Dade standards; low maintenance |
| Therma-Tru fiberglass, impact-rated, with sidelites | $2,000 – $3,000 | Wider opening, more natural light; frame rebuild sometimes required on older homes |
| Custom or oversized entry door, impact-rated | $2,500 – $3,500+ | Non-standard rough openings, custom stain finishes, or reinforced frames for double doors |
| Frame rebuild/buck replacement (add-on) | $200 – $600 | Common in homes with wood rot or water damage around the existing frame |
| Permit fee (Miami-Dade County) | $75 – $250 | We handle the application; fee passed through at cost |
A few things move the number up or down in Gladeview specifically. Homes in the sections closer to NW 27th Avenue with concrete block construction sometimes have narrower rough openings that require a custom-sized unit or a modified buck. Older CBS homes near the Hialeah border occasionally have aluminum frames set in concrete that need to be carefully removed without cracking the surrounding masonry – that adds time and cost. We’ll identify those factors at the estimate, not when we’re halfway through the job.
Seniors and veterans receive a permanent 10% discount on any installation. If your total repair or service work exceeds $200, we take $40 off. These aren’t promotional windows – they’re standing commitments. Call (727) 604-9322 for a free, no-obligation estimate. We’ll give you a written number, and that number won’t change on install day.
Why Therma-Tru for Gladeview Homes
We’re authorized installers for eight brands, and when it comes to entry doors in a South Florida climate like Gladeview’s, we consistently recommend Therma-Tru fiberglass for most residential applications. Here’s the practical reasoning:
Fiberglass doesn’t absorb moisture. Wood doors – even high-grade mahogany – will expand, contract, and eventually warp in a climate where the dew point barely drops below 70 degrees for six months straight. Steel doors hold up better than wood but can corrode at the bottom rail and around hardware cutouts in salt-air environments. Therma-Tru’s fiberglass skin is inert to moisture and holds finish well without annual sanding and repainting.
Impact-rated Therma-Tru units carry Miami-Dade Notice of Acceptance numbers, which means your insurance carrier can verify code compliance, and the county building inspector will sign off without argument. That matters when you’re selling, refinancing, or filing a claim after a storm.
We also work with Mr-Glass for doors that incorporate decorative glass panels, and CWS for clients who need specific frame profiles to match existing fenestration on a home. The right brand depends on your opening and your goals – we’ll tell you which makes sense for your home, not which has the highest margin for us.
Entry Doors and South Florida Code Compliance
Gladeview falls within Miami-Dade County’s jurisdiction, which has some of the strictest building codes in the country for exterior openings. Since 2002, all new and Hurricane-Proof Front & Entry Doors in Miami-Dade must meet High-Velocity Hurricane Zone (HVHZ) standards. That means impact-rated product with a current NOA, or a non-impact door paired with an approved shutter or storm panel system covering the entire opening.
A door permit in Miami-Dade requires a copy of the product approval (NOA), a signed contract, and in most cases a site plan showing the door’s location on the structure. We handle all of that. The inspection happens after installation, and the inspector checks that the door is installed per the manufacturer’s NOA instructions – fastener pattern, flashing, and clearances. We’ve done enough of these in Gladeview and the surrounding area to know exactly what the county wants to see.
If you’ve received a violation notice from Miami-Dade for a non-compliant door, we can pull the permit and replace the unit. We’ll document everything you need to clear the violation.
What to Expect From Our Gladeview Team
Ed Winslow has been in the exterior door and window business since 2011. His name is on the company and on every permit we pull. When you call (727) 604-9322, you won’t hit a voicemail tree or wait for a callback the next business day – a live person answers, every hour of every day. The crew that shows up is uniformed and background-checked. You know who’s at your door before the truck parks in your driveway.
We don’t subcontract entry door work out. The people who do the estimate are connected to the people who do the install, and Ed is reachable if anything falls short of what was promised. That’s not a marketing line – it’s the structure of how we operate as an owner-run business.
The Done Right Promise applies to every entry door we install in Gladeview. If the door doesn’t operate correctly, if the weatherseal fails prematurely, if the frame shows signs of a flashing error – we come back. Full stop. No arguing over warranty language.
FAQs – Entry Doors in Gladeview, FL
How much does entry door installation cost in Gladeview?
Entry door installation in Gladeview runs $800 to $3,500 installed, with most single fiberglass impact-rated replacements landing between $1,400 and $2,200. The main variables are door size, whether the frame needs to be rebuilt, and whether the unit requires a custom finish or sidelite panels. We give you a written, fixed price at the estimate – the number on the invoice matches the number we quoted. Call (727) 604-9322 for a free estimate at your home.
Do I need a permit to replace my front door in Gladeview?
Yes, in most cases. Gladeview falls under Miami-Dade County building jurisdiction, and exterior door replacements generally require a permit and a county inspection to confirm the new unit meets HVHZ (High-Velocity Hurricane Zone) impact standards. We pull the permit, attend the inspection, and hand you the closed permit paperwork when the job is done. You don’t have to navigate the county building department yourself.
How long does entry door installation take?
A standard single-door replacement with no frame rebuild takes three to four hours for our crew. If we’re rebuilding a rotted or damaged frame, or if the opening requires masonry work to widen or reframe, the job can run a full day. We’ll tell you the realistic time estimate when we assess the opening – not after we’ve already started demolition.
Is an impact-rated door required for my Gladeview home?
If you’re replacing an exterior entry door under a Miami-Dade permit – which is required for most replacements – the new door must carry a Miami-Dade NOA and meet HVHZ impact standards, or the non-impact door must be paired with a rated shutter system. For most Gladeview homeowners, an impact-rated fiberglass door or French & Double Doors with impact ratings is the cleaner solution because it satisfies the code requirement without adding a separate shutter. It also tends to improve insurance rates. We’ll confirm your specific requirements at the estimate.
Can you replace an entry door the same day I call?
Fast, scheduled installation depends on door availability and permit status. For in-stock Therma-Tru units on homes that already have an open permit or fall under a permit exemption, we can sometimes schedule within a day or two. Most jobs in Gladeview have a one-to-two-week lead time from estimate to install once the permit is applied for. We’ll be straight with you about the real timeline from the first call.
Key Takeaways
- Entry door installation in Gladeview costs $800 to $3,500 installed, with most fiberglass impact-rated single doors landing between $1,400 and $2,200.
- Miami-Dade County requires permits and HVHZ-compliant product for exterior door replacements – we handle permitting start to finish.
- Therma-Tru fiberglass is our standard recommendation for Gladeview’s heat, humidity, and salt-air conditions.
- Ed Winslow’s Done Right Promise backs every installation – no time limits, no fine print.
- Seniors and veterans receive a permanent 10% discount; any repair over $200 gets $40 off.
- A live person answers (727) 604-9322 around the clock – no voicemail, no call centers.
Get a Free Entry Door Estimate in Gladeview
If your front door is past its prime – sticking, leaking, or simply not up to Miami-Dade’s wind-load standards – call Winslow Windows & Doors at (727) 604-9322. We’ll send someone to your Gladeview home, assess the opening at no charge, and hand you a written price before we leave. There’s no trip charge, no pressure, and no vague ballpark – just a fixed number and a clear scope of work. Ed’s name is on the door, and on every job we do.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Gladeview since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.