Arched & Curved Windows in Gladeview, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Arched & Curved Windows in Gladeview, FL

Arched and curved windows are custom-shaped openings – half-rounds, quarter-rounds, full ellipses, eyebrow arches, and everything in between – that require precise fabrication and field-measured installation to seal and perform correctly. In Gladeview, where the combination of South Florida humidity, intense UV exposure, and hurricane-season wind loads puts every window joint to the test, getting the fit exactly right isn’t optional. At Winslow Windows & Doors, we’ve been measuring, ordering, and setting our Custom & Geometric Windows services in homes across this area since 2011, and Ed Winslow is personally accountable for every single one.

If you’ve got a cracked arched transom above your front door, a fogged half-round that’s been clouding your foyer for two seasons, or you’re building an addition and want a curved window that matches the original profile of your 1960s Gladeview home, this is the page for you. Give us a call at (727) 604-9322 – a live person answers around the clock – and we’ll schedule a field measurement visit at your convenience. You can also explore the full scope of what we do under Custom & Geometric Windows in Gladeview, which covers all of our specialty shape work.

The short answer most homeowners are looking for: a professionally installed replacement arched or curved window in Gladeview typically runs between $420 and $1,100 per unit, depending on size, glass package, and whether it needs impact-rated glazing. Most jobs are measured one day and installed within one to two weeks once the custom unit arrives from the manufacturer.

When You Need Arched or Curved Windows

• Your arched window is fogged, cracked, or leaking around the frame. Curved glass sits in a shaped frame that flexes differently than a standard rectangle – when the seal fails on a half-round above a front entry in Gladeview’s humidity, moisture gets in fast and the insulated unit fogs permanently. That’s a replacement, not a patch job.
• You’re replacing impact windows throughout the house and the arch above your door doesn’t match. A lot of Gladeview homes have a flat-glass replacement history but still have original single-pane arched transoms. Mixing non-impact and impact glazing in the same opening is a code issue under Miami-Dade and Broward product approval standards – everything in the opening needs to meet the same wind-load rating.
• Your arched window frame is visibly rotted, warped, or separating from the rough opening. Wood or aluminum frames on curved windows from the 1970s and 1980s are at the end of their service life in South Florida’s climate. When the frame fails, air and water infiltration accelerates and the surrounding drywall or stucco takes the damage.
• You’re adding a room, sunroom, or second story and want a curved window that looks original, not aftermarket. Custom fabrication lets us match existing profiles closely enough that the new window reads as part of the original architecture – something stock-size windows from a big-box store simply can’t do.
• Your energy bills are climbing and the arched window is the obvious thermal weak point. Original single-pane curved glass has an approximate U-factor around 1.0 – roughly twice the heat gain of a modern low-E insulated unit. In Gladeview, that single-pane arch above a west-facing front entry can add meaningfully to your cooling load every afternoon from April through October.
• You’re purchasing or selling a home and the inspector flagged the arched window as a deficiency. Failed seals, non-impact glazing in a required opening, or frame deterioration are common inspection findings on curved windows in older Gladeview homes. Addressing them before closing keeps the deal on track.

Our Arched and Curved Windows Process

1. Field measurement and rough-opening assessment. Curved and arched windows cannot be ordered from a catalog dimension – the opening has to be measured in person. We measure the rough opening at multiple points (arch height, spring-line width, radius or ellipse geometry) and assess the existing frame condition. If there’s rot, corrosion, or structural irregularity in the rough opening, we document it and factor the repair into your upfront quote before anything is ordered. No surprises on the invoice.
2. Glass package and product selection. Based on your home’s location in Gladeview, the window’s orientation (south and west exposures get the most heat gain), and whether the opening requires impact-rated glazing under your permit, we’ll recommend the right glass package. We work with manufacturers including CWS and ES Windows, both of whom offer custom-shaped units with low-E coatings, laminated impact glass, and insulated glass units in non-standard geometries. We’ll walk you through the options – not push you toward the highest margin product.
3. Permit application where required. In Gladeview and the surrounding Miami-Dade County area, window replacements in existing openings often require a permit when impact-rated glazing is being installed or when the opening itself is being modified. We handle the permit paperwork and coordinate with the county – you don’t have to chase the building department yourself.
4. Custom unit fabrication and lead-time coordination. Once the order is confirmed, custom arched and curved units typically carry a lead time of seven to fourteen business days from our suppliers. We’ll give you a realistic window – not an optimistic guess – and call you as soon as the unit lands so we can schedule installation promptly.
5. Professional installation and frame preparation. Our background-checked, uniformed technicians remove the existing unit carefully, repair or replace any compromised framing material, set the new curved window in the opening, flash and seal the perimeter to manufacturer specification, and verify the unit operates (if operable) and seals correctly. Curved units require careful shimming because the geometry doesn’t allow you to simply plumb a corner – we take the time to get the fit right.
6. Final inspection and cleanup. We walk through the finished installation with you, confirm the sightlines look correct from both inside and outside, and leave you with documentation for the Done Right Promise. If the county inspection is required, we coordinate that scheduling too. If anything isn’t right, Ed’s word is that we come back and make it right – full stop.

Arched and Curved Windows Pricing in Gladeview

Custom-shaped windows cost more than standard rectangles, and that’s not a contractor markup – it’s the reality of glass that has to be cut to a radius, frames that have to be bent or extruded to a profile, and field measurement that adds labor time before a single product is ordered. Here’s how the numbers generally break down for Gladeview homeowners.

A few things that move the number up or down in practice:

• Glass package. Standard clear insulated glass is the baseline. Add low-E coating and you gain energy performance; add laminated impact glass and you meet Miami-Dade Product Approval requirements for hurricane protection. The jump from non-impact to impact glazing on a half-round typically adds $180 to $280 per unit in material cost.
• Radius complexity. A simple half-round with a fixed radius is the easiest curved unit to fabricate. An elliptical arch, an eyebrow with a compound curve, or a unit that needs to match a radius that’s slightly off-standard because the original frame wasn’t plumb – all of those add fabrication time and cost.
• Frame condition. In Gladeview homes built in the 1960s through the 1980s, we commonly find aluminum frames that have corroded at the curved section, or wood bucks that have taken on moisture over decades. Addressing that before the new unit goes in is non-negotiable if you want the installation to last – and it adds cost that we’ll tell you about upfront, not after the fact.
• Access and height. A half-round transom on a single-story entry is a straightforward reach. A large arched window on a two-story facade in a home near NW 79th Street or along the Gladeview corridor adds staging time and sometimes equipment cost.

If your repair portion of the invoice exceeds $200, our standing $40 off any repair over $200 discount applies automatically – no coupon needed. Seniors and veterans receive a permanent 10% discount on any job. And there’s no trip charge for service inside Miami-Dade County.

The estimate is always free. Call (727) 604-9322 and we’ll schedule a measurement visit, take accurate field dimensions, and give you a written number you can hold us to.

FAQs – Arched and Curved Windows in Gladeview

Can an arched window be made impact-rated for hurricane protection?

Yes – Custom Impact Windows with arched and curved designs are available and commonly installed in Gladeview homes. Manufacturers like CWS and ES Windows both produce custom-shaped units with laminated impact glass that meet Miami-Dade and Broward County Product Approval standards. The glass itself is a laminated assembly – two lites of glass bonded to an interlayer – rather than tempered alone, which is what gives it its impact resistance. If your arched window is in a required opening under Florida Building Code (meaning it faces the exterior and is large enough to be considered a protection point), it needs to meet the same wind-load rating as the rest of your openings. We’ll confirm the code requirement for your specific address during the estimate visit so there’s no ambiguity.

How long does it take to get a custom arched window installed in Gladeview?

From the day we take field measurements to the day we install, most custom arched and curved window jobs take two to four weeks total. The measurement and product selection visit is typically scheduled within a few days of your call. Once we place the custom order, fabrication and shipping from our suppliers runs seven to fourteen business days in most cases. We’ll give you a realistic lead time when the order is placed, not a best-case-scenario number. If the job requires a permit – which is common for impact-rated replacements in Miami-Dade County – we account for permit processing time in that estimate too. Call (727) 604-9322 and we can give you a current lead-time estimate based on what’s in the queue right now.

Will a replacement arched window match my home’s existing profile?

In most cases, yes – closely enough that the difference won’t be visible from the street or the interior. Custom fabrication lets us match the radius, the frame width, and the glass-to-frame proportion of your existing window very accurately. What varies is the frame material and finish: if your original window had a bronze anodized aluminum frame and we’re replacing with a white-painted aluminum or a vinyl unit, the color will be different unless you specify a custom finish. We’ll bring samples and show you the available frame options against your existing exterior finish before anything is ordered, so you’re not guessing.

Is it cheaper to repair or replace a fogged arched window in Gladeview?

If the glass itself has failed – meaning the seal between the two panes of an insulated unit has broken and the window is fogged or shows condensation between the panes – the glass unit needs to be replaced. There’s no way to restore a failed insulated glass seal. On a custom arched window, that typically means replacing the insulated glass unit (IGU) within the existing frame if the frame is still structurally sound, or replacing the full window if the frame is corroded, warped, or damaged. A glass-only replacement on a sound frame is less expensive than a full replacement – typically $200 to $450 for a half-round IGU swap versus $600 or more for a full unit replacement. We’ll tell you honestly which scenario applies to your window when we look at it, and we back that assessment with the Done Right Promise. Call us at (727) 604-9322 for a free estimate.

Why Gladeview Homeowners Call Winslow for Custom Window Work

There’s a practical reason we’ve been handling specialty window work in Gladeview since 2011: this community’s housing stock demands it. A lot of the homes here were built between the late 1950s and the mid-1980s, when Geometric & Shaped Windows like arched transoms, curved accent windows, and non-standard opening geometries were common architectural features. Those original windows have aged out, and replacing them correctly takes a different skill set than swapping a standard double-hung.

Ed Winslow built this business on the principle that his name goes on every job – which means we don’t take shortcuts on field measurement, we don’t guess at radius geometry, and we don’t install a unit that doesn’t fit correctly and call it close enough. The Done Right Promise isn’t a marketing line. It’s the standard we hold ourselves to on every curved window we set in Gladeview, whether it’s a simple half-round transom on a single-story entry or a compound-curve arch on a two-story renovation.

We’re authorized installers for brands including ECO Window Systems and Mr-Glass in addition to CWS and ES Windows, which gives us access to a wider range of custom fabrication options than most local shops. And because we handle everything from the field measurement to the permit to the final county inspection, even for Oversized Openings, you’re dealing with one company – not a general contractor who subcontracts the specialty work to someone you’ve never met.

Every technician who comes to your door is background-checked and arrives in uniform. You’ll know who to expect before the truck pulls up. And if you call at any hour, a real person answers – not a voicemail system with a promise to call back the next business day.

For the full picture of our custom and specialty window capabilities in this area, visit our home page or jump to our Custom & Geometric Windows in Gladeview page, which covers the complete range of geometric shapes we install and replace.

Ready to Get a Free Estimate on Arched Windows in Gladeview?

If you’ve got a curved or arched window that’s fogged, leaking, damaged, or simply due for an upgrade to impact-rated glass, the next step is a field measurement visit – and the estimate is completely free. We’ll measure the opening accurately, assess the frame condition honestly, and give you a written price you can hold us to. No trip charge inside Miami-Dade County. No vague ranges that balloon after the job starts.

Call (727) 604-9322 any time – someone will answer. Ed’s name is on this business, and his word is behind every window we install in Gladeview.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Gladeview since 2011.