Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Window Replacement: The Gladeview Owner’s Guide
We stock and install PGT-compatible window replacements throughout Gladeview, with most sashes, balances, and sealed glass units running $280 to $650 installed depending on your series and size. If your PGT window won’t stay up, won’t lock, or has fog between the panes, we can usually match the part from our truck stock or have it in hand within two business days. Most Gladeview homeowners notice the failure the hard way: a sash drops hard in the middle of the night, condensation shows up between panes that used to be clear, or a window that took a hurricane without flinching suddenly won’t seal against the morning humidity.
Which PGT Models This Applies To
PGT builds several distinct window lines, and the replacement part has to match the series, not just the rough opening. In Gladeview we work on PGT WinGuard aluminum and vinyl impact windows, the PGT 5500 and 7700 series, SpectraGuard, and older SGD models still holding on from the 1990s and early 2000s. The fastest way to identify what you have is the AAMA label on the frame edge or the PGT logo etched into the glass corner – it carries the series number and the glass makeup. We’re an independent service provider, not affiliated with PGT, which means we can source OEM PGT parts through our authorized channels or install quality aftermarket equivalents when the OEM part is discontinued. For older PGT series that PGT no longer supports, a properly matched aftermarket balance or seal unit often outperforms the original and costs less. Bring us a photo of the label and measurements of the visible glass, and we’ll tell you exactly what you’re dealing with.
Signs Your PGT Window Replacement Is Failing
- The sash drops when you release it. The coil or block-and-tackle balance has lost tension. In South Florida, the constant humidity plus salt air near Gladeview accelerates the fatigue faster than the manufacturer’s rating suggests.
- Fog or moisture trapped between the panes. The insulated glass unit seal has failed. Once the seal lets go, the argon or krypton fill escapes and the window loses most of its thermal and acoustic value – and you can’t dry it out from the inside.
- The window won’t lock or the lock feels loose. PGT locks ride on a cam and keeper that wear with repeated use, but in older Gladeview homes the real culprit is often a frame that’s shifted a few millimeters out of square and no longer lets the lock seat.
- You feel a draft or hear more road noise than you used to. The weatherstripping on PGT frames is a compression gasket that flattens permanently after enough Miami summers. Once compressed, the window never seals fully again until the gasket is replaced.
- Visible corrosion or pitting on the frame corners. Gladeview sits close enough to the coast that salt in the air finds its way into aluminum frames, especially on older PGT aluminum lines that predate the upgraded finishes.
Replacement Cost & What’s Included
In Gladeview, expect to pay between $280 and $650 per window for a typical PGT replacement installed, with the spread driven by series, glass package, and whether we’re replacing a sash, a balance, a sealed unit, or the full frame. Every quote is line-item: parts, labor, and disposal listed separately so you can see exactly where the money goes. We don’t pad the parts cost and we don’t bolt on surprise change orders after we start. Our work comes with a written warranty on both parts and installation, and it’s covered under the Done Right Promise: if it’s not done right, we come back and make it right, no argument and no invoice.
| Replacement Type | Typical Installed Range (Gladeview) | What It Includes |
|---|---|---|
| Balance replacement (one window) | $110 – $190 | New coil or block-and-tackle balance, frame adjustment, testing |
| Lock and keeper replacement | $85 – $140 | New PGT-compatible lock hardware, re-seating, weatherstrip check |
| Weatherstrip and gasket refresh | $95 – $165 | Full perimeter replacement, frame cleaning, closure test |
| Insulated glass unit replacement | $320 – $650 | New sealed IGU matched to PGT spec, dry and install, disposal of old unit |
| Sash replacement (similar series) | $280 – $520 | Complete sash replacement, balance match, lock check |
DIY or Call Us?
Some things are reasonable for a Gladeview homeowner to check before calling: look for an AAMA label to confirm the series, check whether the screws in the lock are backing out, and feel for a draft around the edges on a humid morning. Going beyond that is where it gets risky. PGT window balances are under high tension, and releasing one wrong can send a sharp metal part into your hand or face. Sealed glass units are heavy, sharp-edged, and need a perfect fit with new sealant or the replacement fails within a season. Ed Winslow grew up in Gladeview and has been fitting windows in this area for over two decades, and he still treats every balance spring with the respect it deserves. Call (727) 604-9322 for a straight answer on whether your job is safe to touch or should be left to a pro.
FAQs
Most PGT window components are built for a 15 to 25 year service life, but Gladeview’s salt air and humidity routinely knock balances and sealed glass units down to 10 to 15 years before they start failing. The glass itself can last decades; it’s the seals, balances, and gaskets that go first. Call (727) 604-9322 with your series number and we’ll give you a realistic lifespan for what you’ve got.
In most cases, yes – replacing the failed part brings the window back to full function without replacing the entire frame. Balances, locks, and weatherstripping are almost always repairable, and a fogged sealed unit can be swapped without touching the frame. Full replacement only makes sense when the frame itself is corroded or out of square beyond adjustment. Call (727) 604-9322 for a free second opinion on any written estimate you’ve received.
A single balance, lock, or weatherstrip replacement usually takes 30 to 60 minutes. An insulated glass unit swap runs 60 to 90 minutes, and a full sash replacement can run two hours. Most Gladeview jobs are done in a single visit. Call (727) 604-9322 and we’ll give you a straight time estimate for your specific window.
Our trucks carry the most common PGT balances, locks, gaskets, and sealants, plus parts for CGI, CWS, and ES Windows. For sealed glass units and less common series, we measure on site and have the exact replacement built and in hand within two business days. Phone answered by a live person any time you call – no voicemail loops, no call centers. Reach us at (727) 604-9322.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Gladeview and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.