Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Roof Replacement & Installation in Gladeview: What to Know First
We replace and install PGT roofing systems in Gladeview as an independent PGT service provider, typically completing most residential roof replacements within three to five working days depending on the roof’s size and the specific PGT product line involved. Honest posture: PGT roof replacement in Gladeview runs higher than commodity shingle work because the materials are engineered for hurricane uplift and the installation has to be done to a stricter standard. If you own a PGT roof and you’re wondering whether repair or full replacement makes more sense, this page is for you. Call (727) 604-9322 for a straight answer and a free estimate.
How PGT Products Fail - and How We Fix Them
PGT builds a serious product, but no roof in South Florida gets a pass from the sun, the salt air, and the afternoon thunderstorms that roll through Gladeview from the Everglades side. Here’s what we actually see on PGT jobs in this area:
- Uplift fatigue on the PGT StormTite perimeter fastening. The StormTite system uses a specific clip-and-fastener pattern along the roof deck edge. After years of tropical storm cycles, those fasteners work loose in the decking long before the visible roofing material shows wear. Homeowners call us for a “roof leak” that’s actually water getting under the edge flashing. We pull the perimeter, re-secure to current uplift standards, and replace the flashing before it becomes a decking failure.
- Thermal expansion cracking along PGT metal ridge caps. PGT’s metal roofing lines expand and contract on a different cycle than the underlayment below them. Over a decade of Gladeview heat, we see hairline cracks at the ridge cap seams that let water in during wind-driven rain. The fix is not caulk. We remove the caps, inspect the seam, replace the closure strips, and refasten with the correct gap allowance.
- Worn sealant at PGT skylight and penetration flashings. Homes with PGT’s integrated skylight systems in Gladeview often develop sealant failure at the curb joints after six to eight years. Florida’s UV load bakes the butyl tape dry. We strip the old sealant, reflash with the same two-part system PGT specifies for warranty coverage, and test the penetration with a water probe before we call the job done.
- Deck rot under PGT tile profiles. Barrel and flat tile from PGT handles the weather, but the underlayment beneath it doesn’t always. In Gladeview we reroof tile jobs where the tile looks fine and the deck underneath is soft. We don’t tile over bad decking. We replace the affected sheets, lay new high-temp underlayment, and reset the PGT tile to the manufacturer’s pattern.
- Incorrect aftermarket underlayment from previous installs. This is the big one. A previous contractor puts a generic felt under a PGT warranty-required synthetic system, and the warranty is void from day one. We see this in Gladeview homes regularly. We strip to deck, lay the specified synthetic underlayment, and if you still have warranty years left, we document the correction so you don’t lose coverage over someone else’s shortcut.
Our PGT Roof Replacement & Installation Process
Every PGT roof replacement we do in Gladeview follows the same sequence. No surprises, no shortcuts.
- 1
Call and roof assessment. A live person answers at (727) 604-9322. We schedule the on-site assessment, walk the roof, and check the deck, flashing, penetrations, and drainage. Ed grew up in Gladeview and knows what these roofs face, so the assessment is specific, not generic.
- 2
Straightforward quote with line items. You get a written quote that names the PGT materials, the underlayment, the flashing system, and the labor. No “we’ll see when we open it up” language unless we genuinely find something hidden.
- 3
Material decision: OEM vs. quality aftermarket. If warranty coverage matters, we use PGT-specified materials. If the roof is well past warranty and you’re paying out of pocket, we walk through where a quality aftermarket product makes sense and where it doesn’t. You decide with real numbers in front of you.
- 4
Replacement and deck repair. We strip, repair or replace decking as needed, lay the underlayment, and install the PGT system per the manufacturer’s fastening schedule. Permits are pulled. Inspections are passed.
- 5
Water test and final walkthrough. We test every penetration, check every seam, and walk the roof with you before we call it complete.
- 6
Done Right Promise. If something isn’t done right, we come back and make it right. That’s not a warranty you have to negotiate around. It’s our name on the work.
What PGT Roof Replacement & Installation Costs in Gladeview
Here’s what we tell Gladeview homeowners to expect, based on the jobs we’ve done across the neighborhood:
- Full PGT shingle roof replacement on an average Gladeview ranch: $14,000 to $22,000 depending on square footage, deck condition, and the specific PGT shingle line specified.
- PGT metal roof replacement, standing seam or exposed fastener: $22,000 to $38,000 for the typical Gladeview home. Metal costs more up front and lasts decades longer.
- PGT tile roof replacement, including new underlayment and re-setting salvageable tile: $19,000 to $34,000. Reusing your existing tile saves material cost but adds labor.
- Repair work on existing PGT roofs: $400 to $1,800 for flashing, penetration, or localized fastener work, depending on access and scope.
What moves the price: roof pitch, deck condition, the number of penetrations, and whether your PGT system is still under a transferable warranty, which locks you into specific materials. The estimate is free. Call (727) 604-9322 and you’ll get a real number, not a range with fine print.
Why Gladeview Homeowners Call Winslow Windows & Doors for PGT Work
Ed Winslow’s name is on the truck, and his house is a few miles from the Palmetto Expressway corridor he drove past every morning on the way to school. That matters when you’re choosing who replaces a roof in Gladeview. We’ve been doing this since 2011, locally owned and owner-operated, with a published address and license number. Every technician who shows up at your door is background-checked and in uniform, so you know who you’re letting onto your property before the first handshake. We’re an authorized installer for eight premium brands, including PGT, CGI, CWS, ES Windows, and ECO Window Systems, so when a job calls for a different product, we recommend what actually works for your situation, not just what’s on the truck. A live person answers our phone 24 hours a day, seven days a week. No voicemail loop. No call center. And if it’s not done right, the Done Right Promise means we come back and make it right. Period.
FAQs
Yes, in most cases, if you use non-PGT-specified materials or fastening patterns on a roof that’s still within its warranty window. The manufacturer’s warranty language is specific about material compatibility. As an independent PGT service provider, we document every repair and replacement so you can show the work was done to spec. Call (727) 604-9322 and we’ll tell you honest where your roof stands before you touch anything.
Most PGT roof replacements in Gladeview are completed within three to five working days once materials are on site and permits are approved. Material lead time depends on the PGT product line, but we’ll give you a firm timeline at quoting. Call (727) 604-9322 for a schedule based on your specific roof.
We use PGT-specified materials whenever the roof is under warranty or the warranty transfer matters to you. When the roof is past warranty and aftermarket makes financial sense, we show you the price difference and let you decide. We never swap materials without telling you. Call (727) 604-9322 for a written quote with the exact product named.
If the decking is sound and the failure is at the flashings, penetrations, or fasteners, repair almost always makes more sense in the short term. If the deck is soft, the underlayment is failing, or the PGT material has reached the end of its service life, replacement is the honest call. We’ll walk the roof with you and show you what we see. Estimates are free at (727) 604-9322.
Yes. Every PGT roof replacement we do in Gladeview is permitted and inspected. We pull the permit, schedule the inspection, and you get the sign-off document. No unpermitted work, because that’s how homeowners end up with decks that fail and insurance claims that get denied.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Gladeview and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After