Awning Windows

Awning Windows in Gladeview, FL | Winslow Windows & Doors

Awning windows hinge at the top and crank outward from the bottom, which lets you leave them cracked open during a Florida afternoon shower without water coming in. For Gladeview homeowners, that simple geometry solves an everyday problem: you want airflow, but you don’t want a wet sill or a soaked floor when a squall rolls through at 3 p.m. Winslow Windows & Doors installs impact-rated awning windows with laminated glass and weathertight frames across Gladeview, and we’ve done it long enough to know that the right window is only as good as the installation behind it. Call (727) 604-9322 to talk through sizing, finishes, and lead times.

Call (727) 604-9322

Product Overview - Awning Windows

The awning window is one of the most practical profiles we install in Gladeview. Because it’s top-hinged and crank-operated, the sash closes against the frame like a flap sealing over an opening. That creates a compression seal on all four sides, which is exactly what you want in a hurricane-prone region where wind-driven rain finds every gap. Rain that hits the glass runs down and off the sill instead of pooling against the weatherstrip. Leave them open during light rain and you still get cross-ventilation in kitchens, bathrooms, and utility rooms.

These units are built around laminated impact glass with a PVB interlayer, set into aluminum or vinyl frames. The laminate does the heavy lifting in a storm: when something hits the glass, the interlayer holds the fragments in place and keeps the window in the frame, so the building envelope stays closed. That’s the whole point in the HVHZ. Pair the structural glass with a frame that’s been tested to your specific wind zone, and you have a window that performs as a system rather than a collection of parts. We configure every Gladeview awning window to its opening size and exposure, because a second-floor unit on the leeward side of a house doesn’t need the same design pressure as a ground-floor opening facing the street.

Architecturally, awnings work well placed high on walls or above fixed picture windows, where the crank mechanism is within reach but the glass captures light and air without obstructing a view corridor. We’ve installed them in block-construction homes typical of Gladeview, where opening sizes are set at rough-in and every inch of framing matters.

Technical Specifications

Every awning window we quote in Gladeview is configured to the opening, the wind zone, and the finish you want. The spec sheet below is what we work from when we price and order.

• Frame materials: Extruded aluminum or vinyl, both engineered for coastal moisture and UV exposure
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass
• Finish colors: White, almond, bronze, black, and tan
• Screen options: Fixed screen or retractable screen
• Operation: Top-hinged sash with crank-out hardware
• Design pressure: Matched to your wind zone, up to +/-100, never higher

The crank hardware is one of the things we always check during a Gladeview install. Coastal salt air is hard on mechanical parts, and a crank that binds six months in is a call we’d rather prevent than field.

Hurricane & Compliance Performance

Laminated Impact Glass
A PVB (polyvinyl butyral) interlayer is bonded between two panes of glass. Under impact, the glass may crack but stays adhered to the interlayer, which keeps the window sealed and the opening protected. This is the core of how the awning window holds up in a storm, and it’s standard on every impact unit we order for Gladeview.

Miami-Dade NOA / Florida Product Approval
Each configuration carries its own Notice of Acceptance or Florida Product Approval number. These are issued per configuration, meaning the size, frame, and glass package you choose must match what was tested. We pull the correct number for your specific quote so your permit submittal in Gladeview goes through without a holdup.

FBC / HVHZ Compliance
The awning windows we install are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Gladeview sits in a region where HVHZ standards govern window and door openings, so compliance isn’t optional. It’s the baseline for any product we put our name on.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a family of protocols: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These tests simulate what a storm actually does, repeated impact, pulsing pressure, and the opportunistic break-ins that sometimes follow. The awning window’s design and glass package are built to that standard.

Design Pressure for Your Wind Zone
Design pressure is matched to your specific wind zone on every quote, up to +/-100. Never higher, because over-specifying adds cost without adding safety. We calculate the requirements for your Gladeview address and order the configuration that meets code for that opening.

Energy Performance
Low-E and insulated glass options are available on the awning window. Low-E coatings reduce solar heat gain without darkening the glass, and an insulated air space adds thermal resistance. For Gladeview homes with east or west-facing walls, these options make a noticeable difference in afternoon heat.

Color & Glass Options

Color on an awning window isn’t just curb appeal. White and almond are the two most common finishes we see in Gladeview’s older block homes and Mediterranean-style facades, and they hold up well against Florida sun without showing salt haze as quickly as darker colors do. Bronze and black have become more popular on modern and coastal-contemporary projects, especially when the homeowner wants the window to read as a shadow line against a lighter stucco wall. Tan works well when you’re matching existing bronze-tone aluminum or a warm exterior palette.

For glass, the choice usually comes down to how the room is used. Clear laminated impact glass gives you the most natural light and the truest exterior view and it’s the workhorse for most Gladeview installations. Tinted glass cuts glare and heat, which matters in rooms that bake in the afternoon. Low-E insulated glass is the upgrade we recommend for bedrooms and living areas where thermal comfort and air-conditioning load are top concerns. Every option meets the same impact standard, so the decision is about light, heat, and visibility, not storm protection.

Installation by Winslow Windows & Doors in Gladeview

An NOA-rated window installed badly is not an NOA-rated window. That’s a blunt statement, but it’s the truth. The Notice of Acceptance covers the product as tested in the lab. The moment it’s set into a rough opening, the installer becomes the variable. In Gladeview, where wind-driven rain and coastal exposure are everyday conditions, installation quality is the difference between a window that seals for twenty years and one that leaks at the first wet season.

Our install process starts before the window is ordered. We measure every opening, check the existing rough framing for rot or out-of-square conditions, and confirm the substrate the window will fasten to. On older Gladeview block homes, that often means checking the condition of the buck framing or furring strips. Then we order the window to match what’s actually there, not what the original plans said.

On install day, the unit is set level, plumb, and square, fastened with the prescribed anchor schedule, and sealed at the perimeter with AAMA 812 low-expansion foam. Flashing and sealant detailing follow AAMA 2400/2410 installation practice, which governs how windows should be integrated into the wall assembly in high-wind regions. We water-test the opening after the sealant cures, and we clean the glass and the sill before we leave. If your Gladeview project requires a permit, we know what the municipality expects for HVHZ submittals and we’ll have the right product approval documentation ready for the package.

There’s no shortcut on this product. The crank hardware, the compression seal, the laminate, all of it performs as designed only when the window is installed square and sealed properly. That’s the service we provide in Gladeview, and it’s the reason most of our projects come from referrals.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Gladeview

If you’re pricing awning windows for a Gladeview home, we’ll help you size the openings, choose a finish and glass package, and get a written line-item quote with the correct NOA or Florida Product Approval documentation. Call (727) 604-9322 to schedule a free on-site measurement and start the conversation.

Written by the team at Winslow Windows & Doors, serving Gladeview, FL.