Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Shingle, Tile & Metal Roofing in Gladeview: What to Know First
We’re an independent ES Windows service provider in Gladeview, and we handle shingle, tile, and metal roofing for homeowners whose ES Windows products need work around the roofline, under flashing, or near the framing that holds those windows in place. Most ES Windows shingle, tile, and metal roofing jobs in Gladeview take one to two days once we’re on site, and we never surprise you on price: you get a written, line-item quote before any work begins. This page is for Gladeview homeowners who own ES Windows products and want a roofer who actually knows how those windows interact with a South Florida roof. Call (727) 604-9322 for a free estimate.
Key Takeaways
- We service ES Windows products alongside shingle, tile, and metal roofing work in Gladeview, as an independent provider, not a brand-authorized dealer.
- Most jobs wrap in one to two days, depending on the roof system and how much flashing or framing needs attention.
- Every quote is written, line-item, and fixed. No change orders after the fact.
- Ed Winslow’s name is on the door. The Done Right Promise is on the work.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid product, but Gladeview’s humidity, hurricane season, and unrelenting sun expose weak points where glass meets roof. Here are the failures we see most often, by series, and what we do about each one.
- ES Windows Series 1000 single-hung frames pulling away from the roofline. The Series 1000 is a workhorse, but its aluminum frame expands and contracts faster than the wood or block behind it. Over a few Gladeview summers, the top corners shift, cracking the roof flashing seal above the window. We pull the old flashing, reset the frame with proper standoffs, and reflash with code-rated material before the shingle or tile goes back down.
- ES Windows Series 2000 horizontal slider weep holes clogged with roof granules. Sliders sit low, and when a shingle roof sheds granules or a tile roof traps sand, those weep holes plug. Water backs up into the track, then into the wall. We clear the full channel, check the sill slope, and replace any degraded track gasket so water drains the way ES Windows designed it to.
- ES Windows Series 3000 casement hinges binding after tile roof grit works into the gear track. Tile roofs in Gladeview shed fine aggregate during heavy rain. That grit lands on the hinge gear of Series 3000 casements, making the crank stiff and eventually stripping the mechanism. We remove the sash, clean and relubricate the gear with the right compound, and seal the hinge cover so grit stops getting in.
- ES Windows Impact-rated units with bent frames from improper roof tile removal. We see this a lot: a roofing crew pries off cracked tiles near a window and smacks the frame. ES Windows impact units are tough, but a bent frame destroys the seal between window and roof. We straighten what’s salvageable, replace what isn’t, and install a protective guard during any tile tear-off so it doesn’t happen again.
- ES Windows thermal break degradation from constant wet/dry cycling at the roofline. The thermal break in ES Windows frames sits exactly where roof runoff splashes. In Gladeview’s wet season, that area cycles wet to dry daily, and the break eventually loses its bond. We inspect for clouding or condensation between panes, then either reseal the affected edge or replace the sash depending on severity.
A note on safety: roof work near glass always carries risk, and flashing removal around impact-rated windows is not a weekend project. High-tension roof fasteners, sharp tile edges, and heavy sashes can injure you fast. We’d rather you call us than end up in the ER.
Our ES Windows Shingle, Tile & Metal Roofing Process
Here’s how a typical ES Windows roofing job goes, start to finish, so you know what to expect when we pull up in Gladeview.
- 1
Call and talk to a person. You call (727) 604-9322. A live person answers, day or night. You tell us what’s happening with your ES Windows product and your roof. We schedule a visit at a time that works for you, with no trip charge inside our home county.
- 2
We show up and diagnose. A uniformed, background-checked tech arrives. We inspect the ES Windows unit, the surrounding roof system, the flashing, and the framing. We tell you exactly what we found, in plain language, before we ever quote a number.
- 3
Written quote with parts choice. We lay out the repair or replacement options. That includes OEM ES Windows parts when they make sense, and quality aftermarket parts when they save you money without cutting corners. You decide. The quote is fixed. No surprises later.
- 4
The work, done carefully. We protect the window, remove only the roof material we need to, do the repair or replacement, and reinstall everything to code. Flashings get sealed properly. Tile and shingle get matched as close as we can. Metal panels get the right fasteners and underlayment.
- 5
Test and walkthrough. We test the window operation, check for leaks at the roof-to-window connection, and walk you through what we did. If a second opinion on an earlier estimate brought you to us, we’ll also show you where the other quote was off.
- 6
The Done Right Promise. If what we did wasn’t done right, we come back and make it right. That promise is 100 years long because that’s how long Ed plans for this company to be accountable.
What ES Windows Shingle, Tile & Metal Roofing Costs in Gladeview
Here are honest ranges for the ES Windows shingle, tile, and metal roofing work we do in Gladeview. Prices reflect typical January 2026 market rates and always come to you as a written, line-item quote before we start.
| Job Type | Typical Range in Gladeview |
|---|---|
| Reflash a single ES Windows unit at the roofline (shingle roof) | $340-$680 |
| Reflash a single ES Windows unit at the roofline (tile roof) | $520-$940 |
| Replace a failed ES Windows sash (Series 1000 or 2000) | $680-$1,350 per sash |
| Reset and reseal an ES Windows frame pulled from the wall | $410-$790 per window |
| Full roof replacement with ES Windows flashing work included (shingle) | $11,200-$19,800 depending on square footage and decking condition |
| Full roof replacement with ES Windows flashing work included (tile) | $22,500-$38,600 depending on underlayment and fastener needs |
What moves the price: how many windows touch the roofline, whether the existing flashing is salvageable, the pitch and height of the roof, and whether you need OEM ES Windows parts or a quality aftermarket match. Leaks discovered mid-job get fixed at the quoted rate, never padded. Call (727) 604-9322 for an exact quote. Estimates are free, and if you have a written estimate from another company, bring it. A second opinion is free too.
Why Gladeview Homeowners Call Winslow Windows & Doors for ES Windows Work
We’re the local company that answers the phone. That sounds small, but when a roof leak is dripping onto your ES Windows frame at 11 p.m., it’s everything. We’ve been in Gladeview since Ed Winslow started this company in 2011, and we still answer every call with a live person, 24 hours a day. No voicemail loops. No call centers.
Our techs know ES Windows products because we work on them every week, and because we also install and service PGT, CGI, CWS, and ECO Window Systems. That multi-brand experience means we can tell you honestly when an ES Windows part is the right call and when a better option exists. Every tech is background-checked and arrives in uniform. We publish our address and license number. We give you a written quote before any work. And we back every job with the Done Right Promise, because Ed’s name is on the door, and on every job we do.
You can call at 2 a.m. and someone will actually answer. The one down the road.
FAQs
No. Removing and reinstalling roof flashing around your ES Windows units does not void the ES Windows manufacturer warranty, as long as the window itself isn’t structurally altered. We take care to preserve the original frame and any warranty-required markings. If a sash or frame component needs replacement, we’ll tell you upfront whether the part we’re installing is OEM or aftermarket so you can make an informed call.
We answer live, 24/7, and we schedule as quickly as the next available slot. For active roof leaks that threaten ES Windows units, we prioritize the visit and often arrive same day or next morning. Call (727) 604-9322 and tell us what’s happening. We’ll give you a straight answer on timing, not a vague window.
We use both, and we tell you which we’re quoting and why. OEM ES Windows parts guarantee exact fit and preserve the brand’s engineering, but they can take longer to source and cost more. Quality aftermarket parts often match or exceed OEM spec at a better price. You decide, and we never install a part we wouldn’t put on our own homes in Gladeview.
Yes. Most jobs involving both the roof system and an ES Windows unit near the roofline can be done in a single visit, typically one to two days. That includes flashing replacement, frame resetting, sash replacement, and the roofing material itself. Call (727) 604-9322 and describe the problem. We’ll tell you if it’s a one-visit job.
No. The quote we give you before work begins is the price you pay, period. If we open up the roof and find something no one could have seen, we stop and show you what we found and what it costs to address, before we do anything else. You approve it first. Fixed pricing, no change orders, written.
It can be. Removing tile or shingle around an impact-rated ES Windows unit means working at height, handling sharp or heavy materials, and dealing with fasteners under tension. A slipped tile or a dropped pry bar can shatter a window or injure you. We’d rather you call us for a free estimate than take that risk. Call (727) 604-9322.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Gladeview and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.