Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Gladeview: What to Know First
We provide independent Therma-Tru roof replacement and installation in Gladeview, and most full replacements are completed in two to four days once materials land. Our pricing is fixed before we start - you’ll see a written line-item quote, not a handshake and a surprise. If you own a Therma-Tru product and your roof is failing around it, call (727) 604-9322 and a live person answers.
This page is for Gladeview homeowners who specifically need roof replacement or installation work tied to Therma-Tru components - skylights, roof-integrated door frames, or flashing systems that interface with Therma-Tru entry doors. We’re not the manufacturer’s service arm. We’re an independent Therma-Tru service provider, and we’ve been doing this work in South Florida long enough to know what fails and why.
Ed Winslow grew up in Gladeview and still lives a few miles from the Palmetto Expressway corridor. He’s been fitting windows, doors, and the roof systems around them in this area for over two decades.
How Therma-Tru Products Fail - and How We Fix Them
- Roof-integrated Therma-Tru door frames leaking at the header flashing. In Gladeview, afternoon thunderstorms dump an inch of rain in under an hour. When a roof replacement is done without re-flashing the top of a Therma-Tru entry door correctly, water finds the seam between the roof deck and the door’s nailing flange. We pull the old flashing, install new step flashing up the roof plane, and apply a peel-and-stick membrane before the shingles or tile go back over it. This is a warranty-safe repair that most roofing crews skip because it adds an hour.
- Therma-Tru SlimLine patio door frames pulling away from the roof overhang. The SlimLine series has a narrow frame profile, which looks sharp but leaves less bearing surface when a roof’s drip edge shifts from heat expansion. In Gladeview, where roof surface temps hit 140 degrees in August, that expansion is constant. We reset the frame on a new treated sill, add structural blocking at the corners, and re-secure the head with through-bolts rather than the original 3-inch deck screws.
- Flashing mismatch after a previous roof replacement. We regularly see Gladeview homes where a prior roofer replaced the roof but left the original Therma-Tru drip cap in place - or worse, removed it and used a generic one. Thermal movement between the door frame and roof deck opens a gap within 18 months. We replace the cap with one cut to match the Therma-Tru frame profile exactly, then seal the transition with a polyurethane sealant rated for South Florida UV exposure.
- Skylight curb rot around Therma-Tru roof windows. In older Gladeview homes, the wooden curb a Therma-Tru roof window sits on has been absorbing humidity for 20 years. By the time someone notices a ceiling stain, the curb is punky and the flashing screws have nothing to bite into. We rebuild the curb with pressure-treated lumber, re-wrap it in membrane, and reset the skylight to factory spec. Skipping the curb rebuild is the most common mistake we see on retrofit jobs.
- Improper shingle to door frame transition on Therma-Tru Fiber-Classic doors. Fiber-Classic doors have a fiberglass skin over a foam core. When a roof’s shingle course butts directly against the door frame without a counter-flashing break, the shingle edge wears a groove into the fiberglass. We install a custom bent aluminum counter-flashing at the transition so the two surfaces never touch. It’s a small detail that doubles the door’s life at the roofline.
Our Therma-Tru Roof Replacement & Installation Process
- 1
Call and talk to a person. You call (727) 604-9322. We answer. We ask what you’re seeing - a leak, a sag, daylight at a frame seam. We schedule a visit.
- 2
On-site inspection with measurements. We come to your Gladeview home and inspect the roof and the Therma-Tru component together. Ed or a lead tech takes photos and measurements, checks the flashing condition, and looks at what the roof deck is doing under the surface.
- 3
Written line-item quote. You get a number with parts and labor separated. OEM Therma-Tru parts when the warranty requires them, quality aftermarket comparable parts when the warranty allows. You decide, with our honest recommendation.
- 4
Roof work and Therma-Tru integration. We remove and replace the roof section, then set, flash, and seal the Therma-Tru component as part of the same job - not as an afterthought by a subcontractor.
- 5
Water test and inspection. We run water across the transition and inspect from inside. If it’s not dry and tight, we haven’t finished.
- 6
Done Right follow-up. We walk you through what we did and leave you with the paperwork. The Done Right Promise is attached to the job, not just mentioned in a brochure.
What Therma-Tru Roof Replacement & Installation Costs in Gladeview
Roof replacement around Therma-Tru components in Gladeview typically runs between $7,500 and $14,000 depending on the roof’s size, pitch, and what’s rotting underneath. A full reroof with a Therma-Tru door frame re-flash and skylight reset lands between $9,000 and $16,000. Here’s how the pieces break down:
| Scope | Gladeview Price Range |
|---|---|
| Therma-Tru door frame re-flash only | $450 - $950 |
| Therma-Tru skylight curb rebuild + reset | $750 - $1,400 each |
| Full roof replacement (shingle, 1,500 sq ft) | $7,500 - $11,000 |
| Full roof replacement (tile, 1,500 sq ft) | $13,000 - $18,000 |
| Roof-to-Therma-Tru transition retrofit (per door or window) | $300 - $700 |
What moves the price: roof pitch, deck rot discovered after tear-off, tile versus shingle, and whether you need OEM Therma-Tru parts for warranty coverage. We don’t do change orders. If the quote says $11,200, the invoice says $11,200. Call (727) 604-9322 for a free estimate specific to your roof.
Why Gladeview Homeowners Call Winslow Windows & Doors for Therma-Tru Work
Ed Winslow started this company in 2011, and his name is still the one on the door - and on every job we do. We’re the one down the road, not a national chain with a call center in another state. When you call at 2 a.m. because a leak opened up over your Therma-Tru door, a live person picks up. Every technician who shows up is background-checked and in uniform, and you’ll know who’s coming before the truck pulls up.
We also work across the full exterior envelope - PGT, CGI, CWS, ES Windows - so when a roof replacement reveals a window or door issue at the transition, we fix both correctly in the same visit. One crew, one standard, one owner standing behind it. The Done Right Promise is our accountability on paper: if it’s not done right, we make it right.
FAQs
No. A roof replacement does not void a Therma-Tru door or skylight warranty as long as the work is done correctly and the product itself is not altered or damaged during the reroof. The key is using the correct flashing and not drilling into the Therma-Tru frame. If you use OEM Therma-Tru parts for any replacement component, you keep the warranty chain clean. Call (727) 604-9322 and we’ll tell you exactly what your specific warranty allows.
Most full roof replacements in Gladeview are completed in two to four days once materials are on site. The Therma-Tru transition work - re-flashing, curb rebuild, or frame reset - adds half a day to a day depending on what we find under the old flashing. We’ll give you a written schedule before we start.
No. The price on your written quote is the price on the invoice. The only exception is if we expose hidden structural damage the quote didn’t anticipate. In that case we stop, show you photos, explain the issue, and get your approval in writing before spending a dollar. No quiet change orders, no end-of-job surprises.
If the glazing is intact, the frame is square, and the leak is at the flashing or curb, re-flashing and a curb rebuild usually solve the problem. If the frame itself is warped or the glass seal has failed, replacement makes more sense. We’ll assess it on-site and give you an honest recommendation - even if it means less work for us. Call (727) 604-9322 to schedule a look.
Yes. Every roof replacement we do in Gladeview is permitted, inspected, and passed. We don’t do unpermitted work, and we’ll handle the paperwork from application to final inspection. That’s part of doing the job right, not an add-on you have to ask for.
Ready to talk about your Therma-Tru roof replacement? Call Ed Winslow’s team at (727) 604-9322 for a free, no-pressure estimate. My name’s on the truck. The work has to match it.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Gladeview and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.