French & Double Doors

French & Double Doors in Gladeview, FL | Winslow Windows & Doors

French doors bring something to a Florida home that sliding glass can’t: a wide, symmetrical opening that makes a patio, courtyard, or pool deck feel like part of the living space. But in Gladeview, where wind-driven rain and flying debris are part of every hurricane season, that wide opening has to be engineered, not just pretty. Winslow Windows & Doors (727) 604-9322 supplies and installs paired impact-rated French and double doors with laminated glass in every lite, multi-point locking, and Florida Building Code High-Velocity Hurricane Zone compliance. We handle the measuring, the permit paperwork, and the install, so you’re left with a door that shuts tight, locks solid, and looks like it belongs on your house. Call us at (727) 604-9322 to talk about your opening.

Call (727) 604-9322

Product Overview - French & Double Doors

These are true paired doors, not two singles pushed together as an afterthought. Both panels are active or one is fixed with flush bolts, depending on how you want the opening to work. You get the symmetry that makes French doors feel intentional on a patio or entry, plus laminated impact glass in every individual lite. That’s the part that matters in a storm: if something hits, the glass may crack, but the PVB interlayer holds the pieces in the frame rather than letting them blow through the room.

The frame is extruded aluminum or vinyl built for coastal rot resistance. The hinges, astragal, and multi-point locking hardware are engineered to work together under wind load, so the door doesn’t rack or pull away from the jamb when pressure climbs. In Gladeview’s heat and salt air, these materials hold up better than wood, and they don’t require repainting after every wet season. We’ve installed these across patio access points, front entries, master-suite walkouts, and covered lanais. If you want the look of a classic French door without the storm-season anxiety that typically comes with it, this is the profile to look at.

Technical Specifications

Here’s what you need to know before you start planning around this product:

• Frame materials: Extruded aluminum or impact-rated vinyl; both hold finish well and resist corrosion in Gladeview’s coastal climate.
• Maximum size: Up to 96 inches wide across the pair, which covers most standard mulled openings and many patio replacements.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated laminated glass, tinted laminated glass, or clear laminated glass.
• Finish options: White, Almond, Bronze, Black, and Tan. Bronze and Black hold up well on modern and Mediterranean facades; White and Almond read more classic.
• Locking hardware: Multi-point lock system engaging at head and sill, with an escutcheon or handle set to match the finish.
• Hardware prep: Standard multi-point prep; additional flush bolts for fixed leaf configurations available.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers available per configuration, verified on your specific quote.

Hurricane & Compliance Performance

These are the features that make this door product code-compliant for Gladeview and the rest of South Florida, and each one matters when a storm tracks through.

Laminated Impact Glass
Every lite in the door is laminated impact glass with a PVB (polyvinyl butyral) interlayer. That interlayer is what holds the glass in the frame under impact. The outer pane can fracture, but the membrane stays intact, which keeps wind, water, and debris from breaching the opening.

Miami-Dade NOA / Florida Product Approval
Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers are issued per configuration, meaning the exact size, glass package, and frame profile you choose carries its own approval. We verify those numbers on your specific quote and attach them to your permit application. That’s the paperwork a Gladeview permitting office actually looks for.

FBC / HVHZ Compliance
These doors are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements, the stricter standard that applies in Miami-Dade and surrounding jurisdictions. This isn’t a generic coastal rating; it’s the specific compliance pathway required for most openings in and around Gladeview.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated door products are tested under a specific protocol family: TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). Together, these test the product’s ability to take a hit, withstand repeated pressure cycles, and resist intrusion after the glass has been impacted.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. That last part matters: an over-rated door often costs more without adding real protection, while an under-rated one fails inspection. We calculate the actual design pressure for your specific opening and wind zone, and specify accordingly.

Energy Performance
Low-E and insulated glass options are available for energy performance. Double-glazed laminated units reduce heat transfer through the glass while keeping the impact rating, which matters in Gladeview, where the western sun can make an unprotected glass door feel like a radiator by late afternoon.

Color & Glass Options

You’re not stuck with a single look. Finish options include White, Almond, Bronze, Black, and Tan. In Gladeview’s older neighborhoods, where low-slung mid-century houses sit alongside newer Spanish and Mediterranean builds, Bronze and Tan blend well with warm stucco and clay roof tones. Black reads cleaner against white or gray exteriors and has become a favorite on more contemporary homes. White and Almond remain the safe, bright choice for traditional Florida ranch and coastal cottage styles.

Glass choices break into four practical camps. Clear laminated is the most economical way to get impact protection. Low-E insulated laminated adds an energy-performance layer for openings that catch direct sun. Tinted laminated cuts glare and heat, which helps on west-facing patio doors in the late afternoon. Every option is laminated, so the impact rating doesn’t change with the glass selection, only the comfort and appearance do. We’ll help you pick the package that matches how you actually use the door, not just what looks good in a catalog photo.

Installation by Winslow Windows & Doors in Gladeview

A hurricane-rated French door is only as good as the opening it’s set into. The NOA and Florida Product Approval documentation assumes the product is installed correctly. When a door gets slammed into a rough opening that’s out of square, shimmed to death, and sealed with whatever foam is on the truck, that approval means far less. We approach every Gladeview installation as if it’s going to be inspected and water-tested on the worst day of hurricane season, because that’s exactly when it will be.

Our process starts with a pre-install inspection of the rough opening: we check the substrate, look for rot or water damage, and confirm the actual dimensions against the approval on file. The door gets set level, plumb, and square, not just “close enough.” The perimeter is sealed using AAMA 812 compliant low-expansion foam perimeter sealant, which fills the gap without bowing the frame. Installation practice follows AAMA 2400 and 2410 standards, which cover the proper methods for setting and sealing fenestration products in the field. We run a final water test, clean up after ourselves, and walk you through the operation and maintenance of the hardware before we leave.

We’re also familiar with how Gladeview and surrounding Miami-Dade jurisdictions handle HVHZ permitting. When you work with us, we pull the product approval numbers that match your exact configuration and submit them with the permit package. If your opening is near the coast, in a higher wind zone, or in a building that requires a specific NOA, we flag that early so there are no surprises at the permit counter.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Gladeview

Ready to see what French and double doors will cost for your Gladeview home? Call Winslow Windows & Doors at (727) 604-9322 to schedule a free on-site measurement. We’ll talk through your opening, wind zone, glass options, and finish choices, and give you a written quote with the product approvals matched to your configuration. We install right here in the Gladeview area and we stand behind the work.

Written by the team at Winslow Windows & Doors, serving Gladeview, FL and the surrounding Miami-Dade area.